The micro-DC geared motor is essentially a DC electric motor. After power-on, the speed is generally high, at least several hundred rpm, and the higher point can reach tens of thousands of revolutions. In this case,
The torque of the motor is very small and cannot drive heavy things. However, because the DC motor has the characteristics of low speed and large torque, this is something that the communication motor cannot replace, so we can
In order to regulate the speed of the DC motor through the reducer, the intention of deceleration can also be reached by the electronic governor.
As the center of the DC geared motor, the DC reducer is the key equipment for adjusting the speed of the DC motor. The upper end is connected with the communication power supply, and the lower end is linked with the DC motor.
The DC governor converts communication power into two output DC power supplies, one input to the DC motor neodymium (stator), one input to the DC motor armature (rotor), DC modulation
The speed governor regulates the speed of the DC motor by manipulating the armature DC voltage. At the same time, the DC motor gives the governor a reaction current, and the governor judges the current according to the reaction current.
The speed of the flow motor, if necessary, correct the armature voltage output, in order to re-condition the motor.
